Zachem the case-compartment is necessary?

In our country the case-compartment - is not so much the craze, how many new tool in historical struggle for square metres.

At you low ceilings, a column acts as "navel" in the middle of a corridor, the room is spoilt with a confused niche into which no ready furniture will get, and a wardrobe with a sideboard are filled up by dusty suitcases? There are no problems, order a case-compartment.

Sliding doors do not require additional space for opening. And as such case individually is produced and modelled, to establish it it is posible anywhere: and in a corridor labyrinth, and in narrowness of an office, and in a niche. There is "compartment" for offices, bedrooms, drawing rooms, libraries, even for nurseries.

The dictionary of the customer

To order that case which is necessary, the buyer should talk to the seller "in one language", that is the nobility its professional terminology. Here some special words and expressions. Falseness-panel - a decorative plate which use for increase in height of a case, concealments of emptiness. Under the invoice also I blossom it, as a rule, same, as well as furnish of doors.

Socle - basic laths on which establish a case. Can be not bearing, and a decorative element.

Profile - a vertical frame of doors (in some variants of cases simultaneously is also the handle). A track - the maximum length directing (rail).

Melamin - decorative, proof to water and mechanical damages cover. Thicker, flexible and strong, than a laminate.

MDF - a plate from zapressovannoy in the vacuum method of a wooden dust (without use epoksidnoy pitch and phenol which are unhealthy the person).

Apportion - an unprofitable ornament.

"Panel" - a finishing plate with convex drawing.

Fasetnoe a mirror - an element of a decor of a door. Has special, from above the semicircular form, it is pasted on a plate from DSP.

The general configuration

First, it is completely not obligatory to do the built in case the integral. Instead of a back wall, lateral panels, a bottom or a roof it is possible to use walls, a floor and a room ceiling. It is much cheaper. The same variant - the unique decision if you establish "compartment" in a narrow niche (less than 1 m at width). Having added falseness-wall, you reduce a track ("run" of sliding doors) and risk to receive an inconvenient case in use. Secondly, doors in cases-compartments are produced not only of a smooth finishing plate, but also from "panel", glass, a mirror, continuous and combined (for example, top - glass or a mirror, a bottom - DSP). If means allow, it should use.

Thirdly, which are necessary to a door (and whether they are necessary in general), depends on where the case is established and that it is supposed to store in it. For example, in a narrow dark premise mirror panels will be pertinent, visually they will make it more widely. For library the glass more approach. In a drawing room open regiments for video-and an audio equipment most likely be required.

Fourthly, the complex decision of an interior on the basis of furniture with sliding doors is possible also. For example, the clothes can smoothly pass in a bed, then in a desk, and then in a bookcase, one of which sliding doors executes a role of an interroom partition. Such approach considers all nuances of an arrangement of walls, a ceiling, doors, windows and heating system.

These interesting doors

So, walls of cases-compartments anything special do not differ from walls of usual ready cases (with that only a difference, that at their "compartment" can not be at all). All "salt" in doors.

By detailed consideration it is possible to allocate only two essentially various systems of sliding doors.

The most widespread - a door on perimetre is located in a steel or aluminium frame and on rollers goes for a drive in a groove. Rollers in these systems usually from plastic or a steel. Such principle of installation has certain defects: high doors at casual blow, for example, the child, can slide off with directing (the truth, are easily put into place), stir to movement dust, a wool of pets and small subjects which are hammered into a groove can. Therefore grooves and rollers should be vacuumed periodically. At other method of installation of a door (it is used in cases Roler of a series “Absolyu”) rollers dvizhutsya on a rail. For reliability increase the basic roller is equipped with the system for prevention soskalzyivaniya from a rail. At the moment of installation this hook is latched on the bottom directing. Such systems have the raised protection against a dust and grains of sand.

It is necessary to notice, that noiselessness, ease of sliding of doors and case-compartment service life depends on quality of the directing. On system of sliding doors the long warranty (sometimes till 10 years) is given.

The internal system

All companies offer traditional regiments and boxes from DSP (ordinary or sliding). They, as a rule, have the standard sizes, therefore something extraordinary to you hardly will manage to be ordered is a designer with the set elements with which you can "play" at own discretion. Most likely in narrow cases-compartments you cannot order small sliding yaschichki (standard boxes simply do not open - stir doors), in the rest the open space for imagination is.

Cellular elements are interesting: every possible baskets and the regiments produced of a steel with vinyl cover. They supply through air circulation in a case, and thanking their "transparency" it is visible, that where is stored. Convenience of such elements also that in need of them it is possible to remove and deliver any large-sized subject in "compartment". However, all depends on how you have planned a case, but to provide such variant costs.

For trousers, belts and ties the automatic or mechanical hanger-lift usually is offered. One more curious innovation - “turboelektrogalstukoderzhalka” with illumination from Mr. Doors. All 72 ties appear instantly at the owner. The unique problem - to get such quantity.

It is not necessary to refuse a combination of DSP-ELEMENTS and the steel cellular. Such variant can become optimum if you plan "compartment" not only as a linen case. Having established drawers from DSP, you can store in them the manual tool, and in cellular baskets over them - to put linen for washing, in other part of a case it is possible to plan veshalu for clothes, and below, under it, a niche for a vacuum cleaner, from above - a mezzanine (it is quite possible with separate doors) where to put boxes and old things…

The table of ranks

Cases-compartments ranzhirovanyi, as well as human company. There is a middle class, there is "elite"… It is possible to carry all cases having a steel profile To furniture "is easier". An example are actively advertised and consequently the most known trade marks Mr. Doors and Stanley. With an aluminium profile it is more expensive, more prestigious than system. Cases with an aluminium profile and the panels finished by a natural interline interval are even more prestigious.

It is necessary to notice, that in furniture of a high class for safety maintenance the glass which has been not simply covered from the interior of a shock-proof film, and triplex (as in cars) is usually used. The mirror is pasted to the panel that allows it to maintain stronger blows.

There are cases in which assemblage "euroscrews" are applied. Unlike usual corners, they are almost imperceptible and allow to avoid backlashes between panels. Open regiments, thanks to it, look accurater. Systems of a class "Lux" for maintenance of ideal smoothness of a course are equipped with dustproof brushes and shumopogloschayuschimi vkladkami, and their directing in addition are polished. The bad form considers absence of protection of a door from blows about the lateral panel (in the majority of cases-compartments special chippers are established).

Cases or doors?

In the Russian market there was extremely expensive, exclusive Swiss system Hawa. It has one basic feature: at complete opening of a door easily drive in a case. Besides cases on the basis of system Hawa it is possible to do massive interroom partitions and the screens fast cleaned by easy movement of a hand. And it is desirable for those to whom the door is necessary only more cheaply, it is possible to recommend complete set Henderson ($21-113 depending on a complete set) into which plastic rollers without bearings enter, aluminium directing and the instruction on assemblage. A door in system "make itself" moves on top, from below there are terminators (that at movement a panel did not dangle). In Henderson the panel from DSP which does not enter into set cost is used usually.

Colour palette

As a rule, "base" colours - white, black, under mahogany, an oak, a nut, a pear, a pine, an ash, etc. are offered.). For an extra charge in some firms it is possible to order panels of exotic shades. Colour of a laminate which panels are finished, can vary from a consignment to a consignment. So that, for example, the dark oak can differ considerably for an eye a shade and drawing. At the case order, the seller is obliged to warn the buyer if change of the demonstration sample is planned and to show the new: the bad form considers, if the firm produces a case of a material which is distinct from the declared. In this case it is possible to require a satisfaction (provided that, ordering, you have looked the sample of the necessary shade "alive", instead of under the catalogue, and have stipulated it in the contract).

The sizes

All prospectuses dazzle with applications, that the sizes of cases-compartments are not limited. Whether the truth it? Not absolutely. Manufacturers have a concept - "the maximum height of a door" (accordingly, an aperture). At desire it is possible to erect and higher case, having established a mezzanine or falseness-panel. Thus, on the basis of an aluminium profile practically unlimited height (metres 5 will arrange any client) is reached. As to length as much as possible big track - 480 - 600 see If it is necessary it is more, it is necessary to join two tracks and to divide a case a constructional partition. Depth of a case be valid any can practically, no less than width of a door. In reasonable limits, certainly. To order a removed panel over 90-100 sm it is not necessary - for such difficult to "glance".

Registration of the order and terms of its fulfilment

In the majority of firms to the client the designer (payment of its visit is included usually into a total sum of the order and it is not stipulated separately) home leaves. It does gaugings, listens to wishes, gives advice, and then draughts.

Payment, as a rule, is made in firm, in the same place you make and sign the agreement-order. It is executed during time stipulated in advance in time from three days about one week. If the project non-standard or is executed not in Russia execution of the order is tightened about one-two months.

Assemblage

All process takes from professional collectors from ones and a half till six o’clock (depending on the size and complexity of a design).

By the way, to block sliding doors of any system an aperture from a wall to a wall it is possible and it is independent, not having special skills - it is possible to save. And here with assemblage of a complete case, with a ceiling, back and lateral panels it is better not to communicate. Ease of movement of doors and a general view frequently hardly depend not only on the trade mark, but also from skill of collectors.