Zachem are necessary caniruyuschie plasters?

Processing of surfaces by sanifying plasters is a part of the whole complex of waterproofing works. Thus the main task of these structures — drainage of outside surfaces vlagosoderzhaschih stone or brick walls (if climatic conditions suppose their drying) at drawing on vlagosoderzhaschie stone or bricklayings, and also protection against salts and a moisture of the basic construction material. Sanifying plasters supply uniform distribution of salts at their exit on a wall surface, interfering with them skaplivaniyu on border "wallplaster". It considerably prolongs service life both walls, and the materials for processing put on them.

The outside waterproofing is carried out in parallel with drawing on internal surfaces of walls of sanifying plasters, in this case the general waterproofing effect raises considerably.

Sanifying plasters represent the two-layer system consisting of porous base plaster and sanifying. Thanks to such system, they have double action: transfer a surface of evaporation from area of the basic laying to a plaster coat and absorb solutions of salts containing in a wall, kristallizuya them in own time.

Formation of salt adjournment occurs directly in a plaster layer: it detains salts, allowing a moisture to evaporate. Thus, on a surface of walls it is not formed a salt touch. 20 mm of a plaster layer, and if significance of water absorption does not exceed 40 % there are enough for effective protection of walls, plasters can be put without waterproofing fulfilment.

Sanifying plasters Remmers satisfy with all requests WTA «System of sanifying plasters». They have ability to accumulate salt without harm for the subsequent shpatlevok and covers, differ high sulfatostoykostyu and have the strengthened structure excluding formation of cracks at drying of thick layers. Systems of sanifying plasters Remmers are used including for an internal waterproofing and execute adjustment of level of humidity, interfering with condensate formation on a surface.

The processing system sanifying plasters provides following kinds of works:

• Basis preparation;
• Drawing of antiadhesive plaster-nabryzga;
• Drawing of levelling plaster;
• Drawing of sanifying plaster;
• Drawing of finishing cover.

Basis preparation includes removal of old plaster, impregnation protivogribkovyimi preparations and priming for linkage of the rests of a dust and basis strengthening. Kladochnyie seams in a processing place clear away on 20mm and too clear of a dust and a dirt. To complete otverzhdeniya sanifying plaster has insufficient waterproof properties, therefore in svezhenanesennyiy the layer can be made for prevention of migration of soluble salts additional processing of the basis by special chemical solutions, for example, Remmers Sulfatex flssig.

As a result of chemical reaction readily soluble salts are transferred in almost insoluble. The liquid which is not damaging a laying, is used both for sanitation of old structures, and for processing of new surfaces before oshtukaturivaniem or realisation obmazochnoy waterproofings with use shlamov.

In quality protivogribkovogo a preparation water-soluble liquid concentrate Adolit M flssig is effective. It serves both a protection frame from defeat by a house fungus, and a sanifying preparation for old buildings, cellars, etc. Besides, a concentrate use as the preventive additive in plaster and shpaklevochnyie solutions.

Plaster-nabryzga drawing increases adhesion of applied plasters, promoting creation of a uniform surface and interfering with them otslaivaniyu.

Plaster-nabryzg prepare zatvoreniem for a dry mix water with addition of the adhesive additive in the ratio 3:1 and put on the basis a layer not less than 5 mm, not mentioning kladochnyie seams.

Levelling plaster allows vyirovnit the big roughnesses and deepenings stone or a bricklaying. Oshtukaturivanie surfaces can be begun not earlier than in a day after drawing of an adhesive layer.

Plaster for restoration and sanirovaniya old designs and laying Remmers Salzspeicherputz is applied to alignment of the bases with significant roughnesses, as a base layer under the subsequent drawing of sanifying plasters or waterproofing covers of system Remmers Kiesol. One of effective preparations is solenakaplivayuschaya plaster for significant decrease in moisture content Remmers Kompressenputz. It is used before drawing of sanifying plasters and corresponds to all requests WTA.

Sanifying plaster is put in the form of one or several layers in the general thickness not less by than 20 mm. After shvatyivaniya it is necessary to give to each plaster coat a roughness by means of a rigid brush. Each subsequent layer put in some days (as a rule — 1 day on 1mm thickness of plaster). Coderzhaschaya a reinforcing fibre sanifying plaster for internal and outside works Remmers Sanierputz altweiss is used as as the first namyota, and nakryivki.

Compatible to plaster sulfatoustoychivaya sanifying voloknosoderzhaschaya plaster Remmers Sanierputz spezialobladaet paropronitsaemostyu, teploizolyatsionnyimi and water-repellent properties. It is effectively applied to repair, updating and sanitation of the facades old, damp and amazed with salts and internal walls, and also for oshtukaturivaniya surfaces in new buildings.

Finishes process of processing of walls drawing of finishing or finishing cover. Paint Remmers Schimmel-Sanierfarbe is applied to finishing furnish of sanifying systems Remmers, differing by high permeability and supplying additional protection against defeat by a mould by means of alkaline character of cover.

Observance of rules of work and use of qualitative products and systems of sanifying plasters guarantees excellent protection of buildings and prolongs term of their service. Source: «Remmers Baushtoftehnik»

It is introduced: on November, 22nd, 2007