Vyisokokachestvennyie group ATLAS plasters

Updating of facades of buildings is process expensive and requiring knowledge. The big attention is necessary for paying on quality and durability of products which we will apply to facade updating. Meeting half-way the clients, ATLAS manufactures a complete spectrum of high-quality plasters.

TONKOSLOYNYIE
STRUCTURAL PLASTERS

The newest tendency at plaster fulfilment is application high-quality tonkosloynyih the plasters allowing after zatirki by a smooth corrosion-proof grater o receive not only desirable colour, but also the invoice: rustikalnuyu («koroed») or rough ("lamb"). The surface is rubbed clean (depending on an invoice kind): for "lamb" - circular movements, and for «koroeda» - horizontal, vertical or circular movements, depending on necessary effect. Process zatirki is very important, as the waterproof connections containing in plaster, become active under the influence of mechanical zatirki. These connections detain water on a surface of plaster and do its proof to washing.
If necessary to divide plaster of various colours or invoices apply a self-glued wide tape. It is pasted vertically on a wall, and plaster which should come and on a tape surface is then put. After tape removal it is received a simple aesthetic line. Next day, after plaster drying, we paste a tape on the surface plastered earlier on its edge, and then it is already possible to continue plaster without fear of pollution of this part of a wall.
High-quality plaster mixes are intended only for manual drawing. Depending on atmospheric conditions and the basis experimentally establish the size and the maximum surface which can be plastered in one work cycle (drawing and zatirka). Plaster needs to be imposed a method «wet on wet», not supposing drying of the jammed consignment before drawing of the subsequent. Otherwise places of connections will be appreciable.
ALIGNMENT AND
BASIS FIRST COAT
At work fulfilment tonkosloynyimi plasters very important qualitatively to prepare a surface under oshtukaturivanie. The basis for two kinds of plasters should be pure, bearing, equal, and also not absorbing. In connection with small thickness of layers of these plasters, and also possibility oshtukaturivaniya only one layer the aesthetic kind depends on flatness of the basis. Therefore before plaster drawing all roughnesses and holes are necessary for filling in and levelling a solution prepared from levelling mix ATLAS or others shpaklevochnyih of mixes. Before plaster drawing, irrespective of the basis, it is necessary to put previously a painting brush or the platen lining weight ATLAS CERPLAST. It has a consistence of dense sour cream and is manufactured white colour, and also three others - under plasters ATLAS DEKO M: klinker, beige and graphite. Surface plaster begin only when a lining layer completely dry, usually in 4-6 hours after a basis first coat.
ATLAS CERPLAST (white colour) is universal priming means for various kinds of the basis. He warns hit of pollution from the basis in outside plaster and change of its colour, raises adhesion with the basis, and also protects and strengthens it. ATLAS CERPLAST it is impossible to dilute, as it will lose the properties, including the protective.

MINERAL PLASTERS

After preparation of the basis in appropriate way it is possible to start drawing of a plaster solution. Depending on a kind of applied substance - cement or akrilovoy pitches - tonkosloynyie plasters are divided on mineral and akrilovyie. The substance kind influences colour of plaster and its kind (a loose mix or paste).
Substance in mineral plaster mixes ATLAS CERMIT DR (rustikalnaya the invoice) and ATLAS CERMIT SN (the rough invoice) is high-quality cement that leads to reception only light pastel colours (7 colours) as the considerable quantity of pigments reduces durability of plaster. Mineral plasters contain waterproof connections which detain water on its surface and do stable against washing off. The mix structure also includes special additives which do a solution plastic and convenient in work, with good adhesion with the basis.
Mineral plasters are made in the form of dry mixes on the basis of a quartz and marble crumb with the size of grain to 1,5, 2 and 3 mm. The solution prepares by vyisyipaniya all contained sack in water and stirring before reception of a required consistence of a solution. At work with plaster in the form of a dry mix use of all contained sack is important. There is a danger, that during transportation there can come crumb division: heavy particles of a crumb will fall to a packing bottom, and easier remain above. Therefore, to receive the homogeneous invoice of the same thickness, it is necessary to use the whole sacks with a mix or to mix their contents before the use. Trudnoudalyaemyie the rests of already seized solution wash off means for removal of cement rests ATLAS SZOP.

AKRILOVYIE PLASTERS

Unlike mineral plasters akrilovyie decorative plasters ATLAS CERMIT R-200 (rustikalnaya the invoice) and ATLAS CERMIT N-200 (the rough invoice) are plasters ready to application on the basis of a water dispersion of artificial pitches with a paste consistence. After bucket opening its contents need to be mixed for reception of a homogeneous mix. Paste cannot be connected to other materials, and also to dilute and condense. This product is economic, simple and convenient in use.
Akrilovaya the pitch, a part these plasters, allows without harm for durability to paint them in various colours (ATLAS offers plasters of 121 colours!). Akrilovyie plasters give a waterproof cover - nontight for the water steam, having big firmness to mechanical damages of a various kind.
Among plasters on the basis of a water dispersion decorative structural plaster ATLAS DEKO S8 is worthy also. It is ready weight for drawing of plasters with the effective invoice. Thanks to possibility of reception of various invoices ATLAS DEKO S8 apply there where wish to receive a decorative kind of a surface more often.
Akrilovyie plasters differ smaller durability, than mineral plasters as under the influence of ultra-violet radiation start to grow old from the moment of their drawing on a wall surface. And mineral plasters improve with the course of time the quality owing to process karbonizatsii to exhaust.

MOSAIC PLASTER

Interesting kind tonkosloynoy plasters is mosaic plaster ATLAS DEKO which has recently appeared in the market of M.Ona is produced on a basis akrilovoy pitches with addition of natural marble and a colour quartz crumb of a choice quality. This plaster is intended for fulfilment of decorative surfaces, including for socles, the bases, balcony walls, dyimohodnyih pipes, etc. In connection with high durability, firmness to washing and istiraniyu mosaic plaster ATLAS DEKO M is recommended for furnish of surfaces with the big load and exposed to atmospheric effects.

TWO IN ONE

If we wish to update simultaneously a facade and to improve thermal isolation of the building, application of one of complex systems will be the best: ATLAS STOPTER with application of expanded polystyrene or ATLAS ROKER with application of mineral cotton wool.
The technology of these systems assumes cover of all surface by a thin layer of a plaster solution. Updating mineral and akrilovyih plasters consists only in painting by their corresponding paints.

Narine GANSHALYAN Source: "the Building Season" #37

It is introduced: on October, 12th, 2002

the Facade on long year
Long since oshtukaturivanie was popular method of furnish of a facade. Now the traditional smoothly plastered walls leave in the past, they are replaced with high-quality structural plasters. The market range of these plasters so is great, that without consultation of the expert it is difficult to choose the most suitable.Occurrence of many new technologies, of course, does not designate...
Fasad on long year
Long since oshtukaturivanie was popular method of furnish of a facade. Now the traditional smoothly plastered walls leave in the past, they are replaced with high-quality structural plasters. The market range of these plasters so is great, that without consultation of the expert it is difficult to choose the most suitable.Occurrence of many new technologies, of course, does not designate...
Nanesenie decorative plaster
One of new and very popular decisions at repair of apartments is application of decorative (impressive) plaster. Impressive plasters represent various colour and a kind of a mix on the basis of the synthetic knitting materials, containing different napolniteli (crumbs of natural and artificial minerals, fibres, flax, a clap etc.). After drawing on walls such plasters acquire characteristic for this...
Kley for building and painting and decorating
SHPATLEVKA THE GLUTINOUSScope. It is used for alignment of walls, ceilings, the wooden, concrete and plastered surfaces, for liquidation of roughnesses and heterogeneity of the invoice under colouring vodoemulsionnyimi and oil paints or pastings by wall-paper. It is applied to works in premises.At drawing shpatlevka tries to keep step shpatelem, after drying does not crumble, does not exfoliate from a...
Primenenie decorative plaster
One of new and very popular decisions at repair of apartments is application of decorative (impressive) plaster. Impressive plasters represent various colour and a kind of a mix on the basis of the synthetic knitting materials, containing different napolniteli (crumbs of natural and artificial minerals, fibres, flax, a clap etc.). After drawing on walls such plasters acquire characteristic for this...
Betonosmesiteli SBR-320 SBR-430
Betonosmesiteli SBR-320 and SBR-430 are intended for preparation of building solutions and concrete mixes, and also for mixing of dry mixes. Technical characteristics betonosmesiteley SBR-320 and SBR-430  betonosmesitel SBR-320betonosmesitel SBR-430SBR-320 SBR-430Geometrical volumeDrum, l320430...
Tonkosloynyie plasters of new generation on an example of plasters ATLAS’a
One of the important decisions during building or house repair is the choice of a finishing layer. With complete reliance it is possible to tell, what exactly the facade (decorative front plasters of a choice quality) depends on aesthetic tastes proektanta and the investor and simultaneously represents a protective barrier of a building from atmospheric effects. Fortunately, there have passed...
Dekorativnaya plaster: a dry mix or a ready product?
Modern building makes great demands not only on reliability and durability of buildings, but also to their appearance, profitability, convenience in work. Now the most widespread decision for creation of decorative facades as in case of drawing it is direct on the mineral bases, and in warming systems, are structural plasters. It is necessary to divide structural and obmazochnyie plasters....
Gidroizolyatsionnyie materials
In a spectrum of waterproofing materials prisutsvuyut various under the price and name characteristics. 1) ParoizolMaterial structure: "Paroizol" represents a combination of two materials: a nonwoven material from 100 %-s' polypropylene and a thin polyethylene film, (laminating a nonwoven material). Dignities: paropronitsaemost in only in one direction, water resitance, air permeability and vetrozaschita, high breaking strength, does not decay, is...
Betonosmesitel SBR-50
 Betonosmesitel SBR-50 it is intended for preparation of building solutions and concrete mixes, and also for mixing of dry mixes. Technical characteristics betonosmesitelya SBR-50 Technical characteristicsbetonosmesitel SBR-50SBR-50The geometrical size of a drum, l50Volume ready zamesa25...
Vollastonit
Vollastonit as the universal purpose raw materials, are widely applied abroad. In particular, the USA is one of leading suppliers and consumers vollastonita in the world market. In our country data napolnitel has not got accustomed for the simple reason - till now is not present and there were no workings out of deposits vollastonitovoy ores.What is Vollastonit? Vollastonit -...
Fasadnyie plasters and paints serpo: "good form" rules
Plaster and painting of facades are, probably, the most widespread method of outside furnish of walls, and to it there is a set of the reasons. Izvestkovo-cement plasters and paints ideally correspond to the most refined requests of architectural "cosmetics", supply reliable protection of walls against adverse external effects and a favorable microclimate in a building. It is necessary to...
Fasadnyie plasters and paints serpo: "good form" rules
Plaster and painting of facades are, probably, the most widespread method of outside furnish of walls, and to it there is a set of the reasons. Izvestkovo-cement plasters and paints ideally correspond to the most refined requests of architectural "cosmetics", supply reliable protection of walls against adverse external effects and a favorable microclimate in a building. It is necessary to...