Saga about Vetonite 2

If remember, we already wrote about remarkable properties Vetonita. It only However, concerned its one version – Vetonita for floors. But, as it has appeared, the family of materials under name Vetonit includes also mixes for walls and ceilings, glues for a tile and much-many other things. Knowing by experience that is better to check up all on itself (furthermore and necessity for the next repair has ripened), I have departed all to the same, already familiar, shop to lovely and sympathetic adviser Mishe.

To my surprise, he has leant me at once (probably, last time I have got its ridiculous questions). But to hide in podsobke did not become, has there and then approached.

– Again repair? – Has sympathetically asked Misha.

– Yes, only already under the complete program. Both a floor, and a ceiling, and a tile to glue it is necessary, – I have complained to it.

– Well, anything, anything, – it has consoled. – now we to you will pick up all. Only what for Vetonit it was necessary for a floor? You, in my opinion, for floor Vetonit took last time?

– Yes, – I have agreed, – but it – for new apartment, we have moved. It in an awful condition, without repair – in any way.

– We will not hasten, – has advised reasonable Misha, correcting a fashionable tie. – we WILL begin With the CEILING. It at you what?

– White, – I have confidently told.

– I mean, dry or damp, and that on it: wall-paper, old plaster or simply concrete basis? And what walls? I why ask? For walls and ceilings there are some kinds shpaklevki, plasters and first coats. Before choosing that is necessary for you, it is necessary to define, what basis, in what premise a material will be used (in dry or in damp) what is required a thickness of a layer.

At first about plaster. If you repair a bathroom, a cellar or other crude premise, choose plaster Vetonit a TT, will not be mistaken (8,1$). It mixes up with water in the ratio 6 l of water on 1 sack (25 kg). To mix it is desirable within 1 minute by means of a drill with a nozzle. Then the solution is defended 15 minutes and once again mixes up about 30 seconds.

– It is necessary to tell, – has added detailed Misha, – that Vetonit a TT – a mix universal, approaches and for dry walls, and for ceilings. However, there is one detail: if very dry, it it is necessary to humidify a surface. Besides, it should be pure, without a dust, oil stains and furthermore firm. And still – do not forget to cover with something a window and a door before start to work.

In four hours, after definitive hashing, Vetonit the TT can be put on a surface. Is better to do it by means of steel shpatelya or a dusting method.

– napyilyat it nothing me, it is better shpatelem, – I have there and then decided.

– SHpatelem so shpatelem, – has agreed compliant Misha. – the Minimum layer – 2 mm, maximum – 7 mm. And if to do some layers consider: each layer should dry out completely, and it, I warn, will take a minimum 1 day. Then dried up layer needs to be ground and if it is necessary, besides to humidify. Besides, for alignment it is possible to use plasters Vetonit In and Vetonit L (a thickness of a layer from 1 to 3 mm).

And here Misha has unexpectedly asked:

– By the way, what for to you all these details? Independently, whether that, have decided repair to do?

I have waved hands:

– Is not present, of course, but I should track, and that know, how happens …

Misha, probably, knew, because has vigorously continued:

– After workers will finish with a first coat, we start the second part marlezonskogo ballet.

– To shpaklevkam? – I have specified.

Misha has looked at me yours faithfully.

–. SHpaklevki are so-called "fair" materials, they can be used as definitive, finishing cover. Them concern Vetonit VH, Vetonit KR and Vetonit LR (8,5$ for packing). If at you crude premises are not present, will approach Vetonit KR or Vetonit LR. These are materials on a glutinous basis. Vetonit VH it is good that it is more universal, suits both bathrooms, and for other damp and dry premises, and therefore it costs more expensively.

All these shpaklevki perfectly lay down on walls and the ceilings processed by plasters Vetonit In, L or a TT. With a ceiling it is possible to do at all then nothing, and walls paste over or paint, as want. By the way, mine to you advice: do not take in head to pour out the remained solutions in a bowl or a toilet bowl. Consequences are simply unpredictable.

– And it is possible to put a tile then, for example?

– For this purpose "fair" shpaklevka does not approach, yes it and is not necessary. Enough Vetonita the TT, only a surface should be well dried. It is necessary to tell, all kinds Vetonita have two very important qualities: they are easy and convenient for putting, and all process of preparation of a material to work takes few minutes. And if all is picked up correctly the economy of time and money is available.

– Has understood. And what with a floor to do? After from it have torn off old linoleum, the floor has appeared all a curve and a plait. And under linoleum – naked concrete.

– Here all is simple, – has certified me Misha. – we PASS To the FLOOR. The material besides steals up depending on conditions. Vetonityi for a floor it is possible to use for any basis, especially for the concrete. Our material was checked and fulfilled in laboratory conditions in Finland with allowance for a corner of an inclination of a surface, a thickness of a layer and time shvatyivaniya. It is established: in 10 hours on put Vetonitu it is possible to go. And that krepit from above finishing cover, it is enough to grind of it. I already told last time but if have forgotten partially how it correctly to make, I will remind.

So, a floor at you concrete. Therefore let’s take Vetonit Vaateri Plus (11,9$). A fine universal material, on it then it is possible to put any floor cover: a tile, a parquet, a laminate, a stopper, carpet covers. At you that on a floor will be?

– I do not know still, – I have mused. – probably, in kitchen – linoleum, and in rooms and in a hall – any kovrolin … By the way, you, is remembered, told about Vaateri Plus. There, if not I am mistaken, there are any subtleties, in my opinion, this material should be vacuumed …

– Quite right, – was glad mine pamyatlivosti Misha. – But give all one after another. The basis should be cleared of a dust, oil and other water-soluble substances. If in concrete there are deepenings more than 20 mm, they need to be closed up Vetonitom 4000 or Vetonitom 5000. Then it is necessary to process concrete a first coat (on 1 part – 5 parts of water). And directly ahead of a first coat really carefully vacuum a surface.

The initial first coat is rubbed in a basis by a soft brush and dries hour two. This priming is necessary that Vetonit seized with a basis is better, there were no air vials and water from Vetonita did not leave in concrete. (As is known, the material porous and water very well absorbs concrete.)

Then it is necessary to take a drill with a nozzle, sack Vetonit Vaateri Plus, 5,5 – 6 litres of water. All it is mixed 1–2 minutes and at once it is spilt on a floor. And to spill I advise strips the in width of 30-40 sm – so the mix is distributed better. For this fascinating employment it is necessary two persons. One should spill, other to prepare the next portion because it is necessary to try to fill in all premise at one time. We recommend to put a layer from 4 to 20 mm. Next day it is possible to go on a floor. And weeks through two it is possible to put also linoleum or that cover which have decided to lay.

– By the way, and what it is necessary to do, if suddenly I will decide to arrange at myself warm floors? Same now it is fashionable, and actually it is convenient.

Misha has not become puzzled:

– Vetonit Renoveyshn! It that is necessary for you. Too a material very popular, easy in application and economic (its price 11,8$ for packing). With its help it is possible to restore the most different floors: wooden, concrete, stone, laid out by a tile. And, certainly, it perfectly approaches for warm floors.

Drawing rules practically the same. A recommended layer of drawing – from 4 to 30 mm. A dosage of water the same, as at Vaateri Plus. Still I can recommend Vetonit 3000 (11,9$), finishing «rovnitel» for concrete floors. On it it is possible to go in 4 hours, and floor cover – to stack through days-two. A supereconomic material.

But, as it is sad, to spoil it is possible any material. Therefore I will tell about USUAL ERRORS.

The first. It is necessary to use initial first coat Praymer MD16 always. The first coat as I already spoke, creates a glutinous basis between the basis and a material. Before it to put, the basis needs to be vacuumed.

The second. It is impossible to add waters more than it is written to instructions, is affects durability of a mix.

The third. To mix a mix it is necessary too strictly under the instruction and, of course, not manually. By the way, if for drawing to use the pump as it do in Finland …

Here Misha has faltered and, having assumed a dignified air, has continued:

– And so, if to use the pump it is possible to cover the areas to 500 square metres!

I have imagined the boundless open spaces which have been filled in Vetonitom, and have asked:

– I still need to put a tile in a bathroom and on kitchen. On what it is better to glue it?

– The tile is better for gluing on GLUES FOR the TILE, – has logically told Misha. – Is better to choose for this purpose Vetonit Plus the Fix (4,9$). It of Vetonitov, and thus it it is possible to use the cheapest for stacking of a tile both on a floor, and on walls. As usually, we begin with basis preparation. The basis should be equal, but we will consider, that we have already levelled it one of levelling solutions for walls. Naturally, the surface should be pure and easy. The dry mix is planted with water in the ratio with 25 kg of a mix on 6,5 – 7 litres of water (approximately 3:1). Well, it is clear, that a dosage to infringe it is not necessary, the technology should be observed.

Mixing occurs in two stages to the help all the same drill with a nozzle. The first stage: mixing with a small amount of water and upholding within 10 minutes. The second stage: addition of the remained water. All solution needs to be used within 4 hours. For square metre it is spent about 4–5 kg of a solution, will calculate further. The mix of minutes ten seizes. A tile stack, densely pressing into a solution, and simultaneously level surfaces of a tile and seams.

When all properly will dry up, it is possible to start to zatirke seams. For walls I recommend «zatirku for seams Vetonit», it can be used and for a floor tile. For a floor will approach and «zatirka for seams klinkernoy tiles Vetonit». Actually versions of glues for tile Vetonit a little, but all of them have the same qualities, as other materials from family Vetonit about which I to you already told.

Misha has taken breath.

– And, at last, the last. I will remind once again: all windows and doors are better for closing and veiling something not to spoil. And … I do not advise to infringe directions for use. On packing all is always painted as how to do. And if the help is necessary, address, I will help, – has added polite Misha.

On it we also have left. All necessary Vetonityi have been purchased by me in the necessary quantity. By the way, during repair workers, in my opinion, have been fairly surprised by my nonfeminine awareness in questions of drawing of solutions of different function. Know ours!

Source: http://www.material.ru