Russkie shutters on American maner

S the beginning we have decided you to surprise. It appears, word etymology «rolstavni» – mixed, English-Russian. In the West they are called - «rollets» (from English roll — a castor). In Russia long since windows were outside closed by shutters. Thus, at mixture of foreign and Russian words it was received — «rolstavni», i.e. «shutters on castors».

The western gate from Russian thieves

Rolstavni not only will protect you from burglars and snipers, not only will be for your windows a term — and zvukozachitoy, protection against an atmospheric precipitation, but also simply will not allow an extraneous eye to examine your life.

This protection is how much serious? We put plastic windows with use of a two-chamber double-glazed window and we receive a window with factor of a heat transfer 0,55. It means that if in the street temperature, for example,-26°S the temperature on the surface of glass paid in a premise, will be approximately +10-12°S. If to establish protective rolstavni with a thermal protection the temperature of the same surface of glass will manage to be lifted approximately on 20 %, i.e. it makes already 15-17°S. Established from an outer side rolstavni it is possible to compare on thermal effect to installation of the third glass in your windows.

Perhaps, for city dwellers it is not very actual yet, but for inhabitants of a country house which is heated by liquid fuel (the same solar oil), a question of savings of heat and, hence, fuel is rather actual. There it would be possible to count very simply economy of fuel as a result of such like small rise in temperature. And this economy will be rather essential.

The same it is possible to tell about noise decrease. Factor shumopogloscheniya nearby 37 DB, i.e. lowered rolstavni approximately on 20 % reduce street noise. It is thought, that it is especially actual for inhabitants of the central part of a city, whose windows leave on brisk Moscow streets.

And, at last, about protection against robbers. It is necessary to tell, that the thieves "working" on summer residences and apartments, try not to contact system protective rolstaven. How to act with a lattice at breaking — it is clear. In engineering our century when have invented mechanical, hydraulic and other kusachki, it is simply had a bite. And rolstavni? Naked hands them not to open, fomkoy or lomikom – it is a lot of to noise, kusachkami you will not have a bite — a design not that. For their "opening" only the circular saw — "Bulgarian" well approaches. However, to saw through it is necessary big enough length, and you will not suffer with yourself such saw, moreover and with the power supply … Here and try to bypass windows with protective rolstavnyami the party.

Features of national protection

What rolstavni to choose? Rolstavni are manufactured steel and aluminium. For the different purposes are applied lameli (an individual element to manufacturing rolstaven) various width. For windows width lameley — from 40 mm, for bigger apertures — 55 mm, for garage gate — 77 mm.

Aluminium rolstavni differ that in the collected kind they take a few places, so, your room will not be deprived by natural illumination. Small aluminium boxes in which are rolstavni in the collected kind, are harmoniously entered almost in any interior.

Steel – stronger also are intended basically for protection against breaking. Aluminium — are more decorative and is a little bit cheaper than the steel. Besides, aluminium rolstavni it is much easier, and for them it is possible to use more simple manual and less powerful electric drive.

In the Moscow market of suppliers aluminium rolstaven it is a lot of. Basically, it is German and Italian firms, Israel, and only one Polish firm is not so actively presented. The qualitative production of German manufacturers, such as world famous firm "ALULUX" is considered.

If to compare production of German and Italian manufacturers the Italian profiles almost in 2 times it is easier also than time in 1,5 more cheaply. Here, the truth, it is necessary to consider, that they and much less strong. Specificity of a climate affects – in Italy rolstavni are used basically for protection against the sun. The matter is that the sun there is so hot, that simple jalousie of its effect do not maintain: after a while they are deformed and sag. Aluminium rolstavni are supplied by thermoisolation, therefore they transfer both a heat, and a bright sunlight.

For protection Italians use rolstavni from steel 1-2 mm of sheet, with a width lameley ~ 100 mm (firm «Bendetto the Pastor»). Such jalousie are used for protection of show-windows of shops, etc.

In Germany it is quite enough for protection and aluminium rolstaven. Why? The matter is that on worked security alert the police usually comes for 3-4 minutes, and for this time not only with strong steel, but also with aluminium protection will not consult. However, as it was already marked, a thickness of the sheet used for manufacturing lameley here almost in 2 times more, and quality of used sheet above. In Italy police probably less quick, than in Germany, therefore for protection are applied rolstavni other class.

In Germany are manufactured also steel protective rolstavni. From Italian they differ basically that for their manufacturing the zinced sheet is used that largely raises corrosion firmness of items. Besides, lameli German rolstaven are covered by a vinyl layer. This painted vinyl cover long does not fade, that is confirmed with the warranty of firm for the term of 5 years. What for this term is necessary? If during this time in rolstavnyah something was rumpled or has broken, having replaced spoilt lameli on new the same colour, — you receive again fine result After all new lameli practically will not differ on colour from older.

What optimum for sew the countries? As you already, probably, have understood a choice directly depends on the purpose. If aim protection against direct solar beams and noise and a dust of streets, your choice – Italian production. It will long serve to you, saving the primary characteristics appearance If your purpose to protect and the house — it is better to apply a German steel profile on which there is even a Russian certificate of stability. There is one more variant of protection — the pressed aluminium profiles. They are much stronger and more rigid than a profile received roller prokatkoy, and at the expense of a thickness of walls is not much weaker than the steel. At will rolstavni can be equipped with special mechanical blocking against their raising outside.

The main thing, all to do in time

At installation rolstaven on apartment houses there is one technical difficulty. At installation rolstaven to height of the third floor the ladder is used the corresponding length. And here above to mount it is necessary, having lowered from a roof, and assemblers - "rock-climbers" for this purpose will be necessary.

On the Russian roar, there is one specific problem. People address for rolstavnyami basically when the house is already constructed, windows are established, and external furnish of the house begins. There are various methods of installation rolstaven in already existing buildings. They are established from window lateral aspect in a window aperture or as though imposed on a window aperture, depending on a wish of the client. The size of a box depends on height of a window aperture. Boxes and rolstavni steal up in tune. However, to establish rolstavni from a window outer side, instead of in a window aperture is not luchschiy a variant. Degree of protection such rolstaven much more low.

Built in rolstavni also are looked much more effectively, and degree of their reliability it is ready above. Waybills rolstavni take one "thin" place — directing. They can and be unbent, and even to tear off from a wall (the truth, by very big efforts). Built in (and practically "immured" in a laying or in concrete) directing neither to turn out, nor to bend it is impossible, for this purpose it is necessary to assort a wall. To get to them it is possible only when rolstavni are lifted, and it happens only when owners of the house. Therefore to plan installation protective rolstaven it is necessary for a design stage.

It is possible, the truth to act and differently … to choose In advance rolstavni for the windows, having learnt the sizes directing, in a laying or a concrete wall on perimetre of a window aperture to keep a groove (flute) in which then it will be possible to establish directing and to mount rolstavni.

Drives for rolstaven can be applied both manual, and electric. At a manual drive — efforts for lifting rolstaven it is necessary prilgat to you. For this reason the manual drive is recommended by experts when the weight rolstaven does not exceed 30 kg. At bolshem weight it is better to apply the electric drive.

If you plan rolstavni with the electric drive at an electric system lining on the house it is necessary to provide podvodku to windows of corresponding electrocables. If you have stopped the choice on rolstavnyah hand-operated, it is possible to provide at once places of a conclusion of a drive in the house then not to spoil internal furnish.

The electric drive is established on a shaft in a box in which are turned off rolstavni and an additional place does not require. In a premise the wire with the switch is removed only. Rolstavni it is possible to stop in any position, i.e. to slightly open a window on any size.

Radio management rolstavnyami is sometimes used. Panel DU can be both single-channel, and multichannel. Multichannel — allows to operate from one panel several rolstavnyami. For garage gate radio management since degree of security of a signal here there is more is used only.

Kotlovan.ru 03.03.2001

Russkie shutters on American maner

S the beginning we have decided you to surprise. It appears, word etymology «rolstavni» – mixed, English-Russian. In the West they are called - «rollets» (from English roll — a castor). In Russia long since windows were outside closed by shutters. Thus, at mixture of foreign and Russian words it was received — «rolstavni», i.e. «shutters on castors».

The western gate from Russian thieves

Rolstavni not only will protect you from burglars and snipers, not only will be for your windows a term — and zvukozachitoy, protection against an atmospheric precipitation, but also simply will not allow an extraneous eye to examine your life.

This protection is how much serious? We put plastic windows with use of a two-chamber double-glazed window and we receive a window with factor of a heat transfer 0,55. It means that if in the street temperature, for example,-26°S the temperature on the surface of glass paid in a premise, will be approximately +10-12°S. If to establish protective rolstavni with a thermal protection the temperature of the same surface of glass will manage to be lifted approximately on 20 %, i.e. it makes already 15-17°S. Established from an outer side rolstavni it is possible to compare on thermal effect to installation of the third glass in your windows.

Perhaps, for city dwellers it is not very actual yet, but for inhabitants of a country house which is heated by liquid fuel (the same solar oil), a question of savings of heat and, hence, fuel is rather actual. There it would be possible to count very simply economy of fuel as a result of such like small rise in temperature. And this economy will be rather essential.

The same it is possible to tell about noise decrease. Factor shumopogloscheniya nearby 37 DB, i.e. lowered rolstavni approximately on 20 % reduce street noise. It is thought, that it is especially actual for inhabitants of the central part of a city, whose windows leave on brisk Moscow streets.

And, at last, about protection against robbers. It is necessary to tell, that the thieves "working" on summer residences and apartments, try not to contact system protective rolstaven. How to act with a lattice at breaking — it is clear. In engineering our century when have invented mechanical, hydraulic and other kusachki, it is simply had a bite. And rolstavni? Naked hands them not to open, fomkoy or lomikom – it is a lot of to noise, kusachkami you will not have a bite — a design not that. For their "opening" only the circular saw — "Bulgarian" well approaches. However, to saw through it is necessary big enough length, and you will not suffer with yourself such saw, moreover and with the power supply … Here and try to bypass windows with protective rolstavnyami the party.

Features of national protection

What rolstavni to choose? Rolstavni are manufactured steel and aluminium. For the different purposes are applied lameli (an individual element to manufacturing rolstaven) various width. For windows width lameley — from 40 mm, for bigger apertures — 55 mm, for garage gate — 77 mm.

Aluminium rolstavni differ that in the collected kind they take a few places, so, your room will not be deprived by natural illumination. Small aluminium boxes in which are rolstavni in the collected kind, are harmoniously entered almost in any interior.

Steel – stronger also are intended basically for protection against breaking. Aluminium — are more decorative and is a little bit cheaper than the steel. Besides, aluminium rolstavni it is much easier, and for them it is possible to use more simple manual and less powerful electric drive.

In the Moscow market of suppliers aluminium rolstaven it is a lot of. Basically, it is German and Italian firms, Israel, and only one Polish firm is not so actively presented. The qualitative production of German manufacturers, such as world famous firm "ALULUX" is considered.

If to compare production of German and Italian manufacturers the Italian profiles almost in 2 times it is easier also than time in 1,5 more cheaply. Here, the truth, it is necessary to consider, that they and much less strong. Specificity of a climate affects – in Italy rolstavni are used basically for protection against the sun. The matter is that the sun there is so hot, that simple jalousie of its effect do not maintain: after a while they are deformed and sag. Aluminium rolstavni are supplied by thermoisolation, therefore they transfer both a heat, and a bright sunlight.

For protection Italians use rolstavni from steel 1-2 mm of sheet, with a width lameley ~ 100 mm (firm «Bendetto the Pastor»). Such jalousie are used for protection of show-windows of shops, etc.

In Germany it is quite enough for protection and aluminium rolstaven. Why? The matter is that on worked security alert the police usually comes for 3-4 minutes, and for this time not only with strong steel, but also with aluminium protection will not consult. However, as it was already marked, a thickness of the sheet used for manufacturing lameley here almost in 2 times more, and quality of used sheet above. In Italy police probably less quick, than in Germany, therefore for protection are applied rolstavni other class.

In Germany are manufactured also steel protective rolstavni. From Italian they differ basically that for their manufacturing the zinced sheet is used that largely raises corrosion firmness of items. Besides, lameli German rolstaven are covered by a vinyl layer. This painted vinyl cover long does not fade, that is confirmed with the warranty of firm for the term of 5 years. What for this term is necessary? If during this time in rolstavnyah something was rumpled or has broken, having replaced spoilt lameli on new the same colour, — you receive again fine result After all new lameli practically will not differ on colour from older.

What optimum for sew the countries? As you already, probably, have understood a choice directly depends on the purpose. If aim protection against direct solar beams and noise and a dust of streets, your choice – Italian production. It will long serve to you, saving the primary characteristics appearance If your purpose to protect and the house — it is better to apply a German steel profile on which there is even a Russian certificate of stability. There is one more variant of protection — the pressed aluminium profiles. They are much stronger and more rigid than a profile received roller prokatkoy, and at the expense of a thickness of walls is not much weaker than the steel. At will rolstavni can be equipped with special mechanical blocking against their raising outside.

The main thing, all to do in time

At installation rolstaven on apartment houses there is one technical difficulty. At installation rolstaven to height of the third floor the ladder is used the corresponding length. And here above to mount it is necessary, having lowered from a roof, and assemblers - "rock-climbers" for this purpose will be necessary.

On the Russian roar, there is one specific problem. People address for rolstavnyami basically when the house is already constructed, windows are established, and external furnish of the house begins. There are various methods of installation rolstaven in already existing buildings. They are established from window lateral aspect in a window aperture or as though imposed on a window aperture, depending on a wish of the client. The size of a box depends on height of a window aperture. Boxes and rolstavni steal up in tune. However, to establish rolstavni from a window outer side, instead of in a window aperture is not luchschiy a variant. Degree of protection such rolstaven much more low.

Built in rolstavni also are looked much more effectively, and degree of their reliability it is ready above. Waybills rolstavni take one "thin" place — directing. They can and be unbent, and even to tear off from a wall (the truth, by very big efforts). Built in (and practically "immured" in a laying or in concrete) directing neither to turn out, nor to bend it is impossible, for this purpose it is necessary to assort a wall. To get to them it is possible only when rolstavni are lifted, and it happens only when owners of the house. Therefore to plan installation protective rolstaven it is necessary for a design stage.

It is possible, the truth to act and differently … to choose In advance rolstavni for the windows, having learnt the sizes directing, in a laying or a concrete wall on perimetre of a window aperture to keep a groove (flute) in which then it will be possible to establish directing and to mount rolstavni.

Drives for rolstaven can be applied both manual, and electric. At a manual drive — efforts for lifting rolstaven it is necessary prilgat to you. For this reason the manual drive is recommended by experts when the weight rolstaven does not exceed 30 kg. At bolshem weight it is better to apply the electric drive.

If you plan rolstavni with the electric drive at an electric system lining on the house it is necessary to provide podvodku to windows of corresponding electrocables. If you have stopped the choice on rolstavnyah hand-operated, it is possible to provide at once places of a conclusion of a drive in the house then not to spoil internal furnish.

The electric drive is established on a shaft in a box in which are turned off rolstavni and an additional place does not require. In a premise the wire with the switch is removed only. Rolstavni it is possible to stop in any position, i.e. to slightly open a window on any size.

Radio management rolstavnyami is sometimes used. Panel DU can be both single-channel, and multichannel. Multichannel — allows to operate from one panel several rolstavnyami. For garage gate radio management since degree of security of a signal here there is more is used only.

Kotlovan.ru 03.03.2001

Russkie shutters on American maner

S the beginning we have decided you to surprise. It appears, word etymology «rolstavni» – mixed, English-Russian. In the West they are called - «rollets» (from English roll — a castor). In Russia long since windows were outside closed by shutters. Thus, at mixture of foreign and Russian words it was received — «rolstavni», i.e. «shutters on castors».

The western gate from Russian thieves

Rolstavni not only will protect you from burglars and snipers, not only will be for your windows a term — and zvukozachitoy, protection against an atmospheric precipitation, but also simply will not allow an extraneous eye to examine your life.

This protection is how much serious? We put plastic windows with use of a two-chamber double-glazed window and we receive a window with factor of a heat transfer 0,55. It means that if in the street temperature, for example,-26°S the temperature on the surface of glass paid in a premise, will be approximately +10-12°S. If to establish protective rolstavni with a thermal protection the temperature of the same surface of glass will manage to be lifted approximately on 20 %, i.e. it makes already 15-17°S. Established from an outer side rolstavni it is possible to compare on thermal effect to installation of the third glass in your windows.

Perhaps, for city dwellers it is not very actual yet, but for inhabitants of a country house which is heated by liquid fuel (the same solar oil), a question of savings of heat and, hence, fuel is rather actual. There it would be possible to count very simply economy of fuel as a result of such like small rise in temperature. And this economy will be rather essential.

The same it is possible to tell about noise decrease. Factor shumopogloscheniya nearby 37 DB, i.e. lowered rolstavni approximately on 20 % reduce street noise. It is thought, that it is especially actual for inhabitants of the central part of a city, whose windows leave on brisk Moscow streets.

And, at last, about protection against robbers. It is necessary to tell, that the thieves "working" on summer residences and apartments, try not to contact system protective rolstaven. How to act with a lattice at breaking — it is clear. In engineering our century when have invented mechanical, hydraulic and other kusachki, it is simply had a bite. And rolstavni? Naked hands them not to open, fomkoy or lomikom – it is a lot of to noise, kusachkami you will not have a bite — a design not that. For their "opening" only the circular saw — "Bulgarian" well approaches. However, to saw through it is necessary big enough length, and you will not suffer with yourself such saw, moreover and with the power supply … Here and try to bypass windows with protective rolstavnyami the party.

Features of national protection

What rolstavni to choose? Rolstavni are manufactured steel and aluminium. For the different purposes are applied lameli (an individual element to manufacturing rolstaven) various width. For windows width lameley — from 40 mm, for bigger apertures — 55 mm, for garage gate — 77 mm.

Aluminium rolstavni differ that in the collected kind they take a few places, so, your room will not be deprived by natural illumination. Small aluminium boxes in which are rolstavni in the collected kind, are harmoniously entered almost in any interior.

Steel – stronger also are intended basically for protection against breaking. Aluminium — are more decorative and is a little bit cheaper than the steel. Besides, aluminium rolstavni it is much easier, and for them it is possible to use more simple manual and less powerful electric drive.

In the Moscow market of suppliers aluminium rolstaven it is a lot of. Basically, it is German and Italian firms, Israel, and only one Polish firm is not so actively presented. The qualitative production of German manufacturers, such as world famous firm "ALULUX" is considered.

If to compare production of German and Italian manufacturers the Italian profiles almost in 2 times it is easier also than time in 1,5 more cheaply. Here, the truth, it is necessary to consider, that they and much less strong. Specificity of a climate affects – in Italy rolstavni are used basically for protection against the sun. The matter is that the sun there is so hot, that simple jalousie of its effect do not maintain: after a while they are deformed and sag. Aluminium rolstavni are supplied by thermoisolation, therefore they transfer both a heat, and a bright sunlight.

For protection Italians use rolstavni from steel 1-2 mm of sheet, with a width lameley ~ 100 mm (firm «Bendetto the Pastor»). Such jalousie are used for protection of show-windows of shops, etc.

In Germany it is quite enough for protection and aluminium rolstaven. Why? The matter is that on worked security alert the police usually comes for 3-4 minutes, and for this time not only with strong steel, but also with aluminium protection will not consult. However, as it was already marked, a thickness of the sheet used for manufacturing lameley here almost in 2 times more, and quality of used sheet above. In Italy police probably less quick, than in Germany, therefore for protection are applied rolstavni other class.

In Germany are manufactured also steel protective rolstavni. From Italian they differ basically that for their manufacturing the zinced sheet is used that largely raises corrosion firmness of items. Besides, lameli German rolstaven are covered by a vinyl layer. This painted vinyl cover long does not fade, that is confirmed with the warranty of firm for the term of 5 years. What for this term is necessary? If during this time in rolstavnyah something was rumpled or has broken, having replaced spoilt lameli on new the same colour, — you receive again fine result After all new lameli practically will not differ on colour from older.

What optimum for sew the countries? As you already, probably, have understood a choice directly depends on the purpose. If aim protection against direct solar beams and noise and a dust of streets, your choice – Italian production. It will long serve to you, saving the primary characteristics appearance If your purpose to protect and the house — it is better to apply a German steel profile on which there is even a Russian certificate of stability. There is one more variant of protection — the pressed aluminium profiles. They are much stronger and more rigid than a profile received roller prokatkoy, and at the expense of a thickness of walls is not much weaker than the steel. At will rolstavni can be equipped with special mechanical blocking against their raising outside.

The main thing, all to do in time

At installation rolstaven on apartment houses there is one technical difficulty. At installation rolstaven to height of the third floor the ladder is used the corresponding length. And here above to mount it is necessary, having lowered from a roof, and assemblers - "rock-climbers" for this purpose will be necessary.

On the Russian roar, there is one specific problem. People address for rolstavnyami basically when the house is already constructed, windows are established, and external furnish of the house begins. There are various methods of installation rolstaven in already existing buildings. They are established from window lateral aspect in a window aperture or as though imposed on a window aperture, depending on a wish of the client. The size of a box depends on height of a window aperture. Boxes and rolstavni steal up in tune. However, to establish rolstavni from a window outer side, instead of in a window aperture is not luchschiy a variant. Degree of protection such rolstaven much more low.

Built in rolstavni also are looked much more effectively, and degree of their reliability it is ready above. Waybills rolstavni take one "thin" place — directing. They can and be unbent, and even to tear off from a wall (the truth, by very big efforts). Built in (and practically "immured" in a laying or in concrete) directing neither to turn out, nor to bend it is impossible, for this purpose it is necessary to assort a wall. To get to them it is possible only when rolstavni are lifted, and it happens only when owners of the house. Therefore to plan installation protective rolstaven it is necessary for a design stage.

It is possible, the truth to act and differently … to choose In advance rolstavni for the windows, having learnt the sizes directing, in a laying or a concrete wall on perimetre of a window aperture to keep a groove (flute) in which then it will be possible to establish directing and to mount rolstavni.

Drives for rolstaven can be applied both manual, and electric. At a manual drive — efforts for lifting rolstaven it is necessary prilgat to you. For this reason the manual drive is recommended by experts when the weight rolstaven does not exceed 30 kg. At bolshem weight it is better to apply the electric drive.

If you plan rolstavni with the electric drive at an electric system lining on the house it is necessary to provide podvodku to windows of corresponding electrocables. If you have stopped the choice on rolstavnyah hand-operated, it is possible to provide at once places of a conclusion of a drive in the house then not to spoil internal furnish.

The electric drive is established on a shaft in a box in which are turned off rolstavni and an additional place does not require. In a premise the wire with the switch is removed only. Rolstavni it is possible to stop in any position, i.e. to slightly open a window on any size.

Radio management rolstavnyami is sometimes used. Panel DU can be both single-channel, and multichannel. Multichannel — allows to operate from one panel several rolstavnyami. For garage gate radio management since degree of security of a signal here there is more is used only.

Kotlovan.ru 03.03.2001


Russkie shutters on American maner
S the beginning we have decided you to surprise. It appears, word etymology «rolstavni» – mixed, English-Russian. In the West they are called - «rollets» (from English roll — a castor). In Russia long since windows were outside closed by shutters. Thus, at mixture of foreign and Russian words it was received — «rolstavni», i.e. «shutters on castors».The western gate...
Russkie shutters on American maner
S the beginning we have decided you to surprise. It appears, word etymology «rolstavni» – mixed, English-Russian. In the West they are called - «rollets» (from English roll — a castor). In Russia long since windows were outside closed by shutters. Thus, at mixture of foreign and Russian words it was received — «rolstavni», i.e. «shutters on castors».The western gate...
Kak to choose rolstavni on windows and doors
From the very beginning we have decided you to surprise. It appears, word etymology rolstavni - mixed, English-Russian. In the West they are called - rollets (from English roll - a castor). In Russia long since windows were outside closed by shutters. Thus, at mixture of foreign and Russian words it was received - "rolstavni", i.e. "shutters on castors".The western...
SIMPLEX: the Summer discount on rolstavni
Company SIMPLEX represents rolstavni Safe&Light: completely closed, completely opened or raised with preservation of the fixed interval between lamelyami. As additional argument in favour of Safe&Light discounts serve. At the order rolstaven from a "viewing" profile - the discount of 25 %, and at the order in SIMPLEX ready rolstaven from a profile with penopoliuretanovyim napolnitelem - the discount of...
Protective protections
ROLSTAVNIModern role shutters or metal jalousie as them still name, executed of metal, almost have no cracks, and cavities of laths can be filled in by an effective heater that allows to protect heat. If windows are in addition closed rolstavnyami it allows to raise their thermal resistance, that is equivalent additional ostekleniyu. Warmed rolstavni increase temperature on an internal...
Zaschitnyie jalousie Proma
There come colds...Therefore the majority of inhabitants of country houses will get over back in a megacity. There is an old national sign: if the country house it is fast in it becomes empty there are unbidden visitors. On the statistican their majority comes through windows. How to secure itself, the property and not to spoil appearance of the house?...
Raznovidnosti automatic gate
Times when looking through films of foreign production, we with envy looked at, how heroes are well recollected, not leaving the car, gate of the garage or the house open. But time went, time has exchanged, people, customs and such the luxury a reality there was no time for us. Now each of us in the presence of desire and...
ZHalyuzi, windows. The dictionary of terms.
AND IN Z AND TO L ABOUT P R WITH F SH AND Reinforcing profile (windows) - The steel intensifying element which is in PVC-PROFILE and necessary for giving of necessary rigidity of a window design. Begunki (jalousie) - The component of vertical jalousie necessary for movement, and also for turn lameley. IN Valans (jalousie)...
Derevyannyie windows
     It would seem, the century of natural materials remains in the past, and our reality forces to be reoriented on cheaper synthetic materials. The same tendency occurs and in sphere of windows: on change to habitual wooden windows the plastic come. However nostalgia on a traditional natural material is shown more and more obviously both in Europe, and in Russia....
Rolstavni
To write the article about rolstavnyah I has decided not so much on the instructions of edition, and is faster on heart command. This theme for me is especially actual, because I have lived 20 years of the hard life in apartment on the ground floor. Tortures which I and my house daily tested to transmit words it is impossible....
Rolstavni in private life
To write the article about rolstavnyah I has decided not so much on the instructions of edition, and is faster on heart command. This theme for me is especially actual, because I have lived 20 years of the hard life in apartment on the ground floor. Tortures which I and my house daily tested to transmit words it is impossible....
Ustanovka a plastic window with PVC-PROFILE VEKA
Installation of a plastic window of PVC VEKA. The basic stages of installation works on window replacement (installation of a plastic window, metalloplastikovogo windows, an aluminium window, a wooden window).The short list of installation works: a spadework before window installation, dismantle of an old window, preparation of a window aperture, installation of a new window of PVC VEKA, window sill...
Okonnyie kontsitsioneryi
 The window conditioner - the monoblock conditioner which is mounted in a window aperture or a thin wall. In comparison with split-systems "okonnik" has a number of defects, among which more a high level of noise and absence of a freedom in choosing of an installation site. Besides, it worsens light exposure of a premise, blocking a part of a...