«Russian wall». House-building system byistrovozvodimyih buildings

Who from us does not dream of own house! Having taken advantage of technology of house-building system «Russian wall» your dream becomes a reality.

«Russian wall» is a house-building system for fast building energoeffektivnyih, warm buildings and structures of different function.

The panel «Russian wall» consists of a metal skeleton and expanded polystyrene. At the expense of the diagonal cross-section cores welded to welded wire armaturnoy to a grid from each party, stenovaya the panel has high durability.<r />
Installation of walls of a building begins with installation of panels on the monolithic tape base or a monolithic plate. Armaturnyie cores are established with step of 50 sm in the drilled apertures from the interior of bearing walls. Fixing of panels to armaturnyim to cores is carried out by coordination by a soft wire. At joining of panels to each other for maintenance of rigidity of connection are established additional armaturnyie grids and contact a grid stenovoy panels by means of a pneumopistol metal skobami.

Installation of panels of 1 floor takes 2-3 days.

Small apertures are cut out in established in design position stenovyih panels. The big apertures are executed by preliminary panels before installation are sharp.

Building overlappings are executed also from panels «Russian wall». Horizontal alignment of panels of overlapping is carried out by means of system time rasporok.

Before concreting process the lining of all communications laid in a wall according to the project should be finished.

Concrete on walls and the bottom part of plates is put by a method torkretirovaniya — nabryizga under pressure. Also it is possible to put concrete manually. The Concrete layer makes 50 mm from each party.

Definitive furnish of walls from panels «Russian wall» can be any — plaster and colouring, facing by a brick or a stone.

Advantages of house-building system «Russian wall»:
  • Building terms in 2-3 times are reduced;
  • The additional area is formed;
  • There is no necessity for use of elevating cranes;
  • The combination with other technologies of building is possible;
  • Erection of buildings in seismodangerous areas since the reinforced design in a combination to concrete does erected buildings the monolithic.

    The manufacturer of panels «Russian wall»: Joint-Stock Company "Management company" STROJPISHCHEMASH ”» Source: the Newspaper "Building" #12 (2005) heading «Stroyinform»

    It is introduced: on June, 16th, 2005

    Technologies of monolithic building maloetazhnyih buildings
    Question: technologies of monolithic building are how much suitable at erection maloetazhnyih buildings?The answer: In maloetazhnom building monolithic concrete finds wide enough application. So, opalubochnyie systems companies "Utinord" (France) allow team to concrete in 7 persons daily one block section on 2 apartments of the 3-storeyed typical house. Application in maloetazhnom building of a fixed timbering from expanded polystyrene is...
    Byistrovozvodimyie buildings - advantage of modern building
    Realisation of many state projects is interfaced to scale building. It is obvious, that traditional methods of capital construction will not help to solve a problem in the limited terms. The problem decision sees in technology use byistrovozvodimyih buildings which will allow fast, qualitatively, with minimum attraction of a labour and the building engineering to erect the diversified buildings and...
    Byistrovozvodimyie modular buildings
    Modular buildings have entered into our life for a long time, but now they became one of the most widespread kinds of building objects. Where look - installation of these simple, but reliable designs everywhere is conducted. They use the big popularity, and demand for them steadily grows. So that such modular buildings?These are the universal designs consisting of a...
    Metall in furnish and building
    In recent times our state used metallokonstruktsii only in industrial enterprises. But times vary. Today the market economy has allowed to expand the nomenclature of buildings and structures in which metal designs are used. Thanks to spatial metal designs it is possible to block such structures as the covered markets, trading halls of large supermarkets, universal sports halls, the theatrically-entertainment...
    Tipovaya a design modular byistrovozvodimyih buildings
    In our previous article which nazavaetsya Byistrovozvodimyie modular buildings, we have acquainted you with concept "modular buildings", have found out, they consist of what basic elements, where and for what purposes they are usually used. Time has come to see a modular building from within, to familiarise with a block module design - a base element byistrovozvodimyih buildings.SkeletonThe basic bearing...
    Constructive systems of many-storeyed buildings with use of the uniform bill of rating of modular ferro-concrete designs
    The uniform bill of rating of designs is co-ordinated to new decisions frame, with a partial skeleton and beskarkasnyih buildings, knots of interfaces of constructive elements, appointment and maintenance of hard disks of overlappings, maintenance of longitudinal stability of buildings. In a complex with the indicated decisions questions of multipurpose use of plates and stenovyih panels and increase of aesthetic...
    Byistrovozvodimyie buildings from LMK and sandwiches-panels
    Constant growth of requirement in industrial, inhabited, storage rooms and offices forces experts of building branch to search for new methods of reduction of terms of building, thus avoiding quality losses. For today there is a set of new technologies among which the universal decision are byistrovozvodimyie buildings from metallokonstruktsiy. Easy and convenient, they have durability and the low price....
    Izgotovlenie steel dvervy
    Steel doors in standard performance with an upholstery vinilis a skin. We postoraemsya "poshagovo" to describe all protses door manufacturing. At first the box of all steel door which ustanavena will be direct further in an aperture is produced and on it on loops the steel door already puts on.The box is produced of a profile pipe 50h25 mm. The...
    Bezopasnost a quiet and comfortable life
    All of us know for a long time, that safety is the lien of a quiet and comfortable life. And we, of course, at all do not wish to be afraid both for the well-being, and for well-being of close people, being in own house. Besides, it is not too pleasant to worry and about safety of property which we...
    Primenenie armaturnoy steels of class A500S in building construction from monolithic ferro-concrete
    Until recently in Russia the armature of a periodic profile of class A400 (A-III) was a principal view of armature for ferro-concrete designs. In the Russian Federation this armature is produced of a steel of marks 35GS and 25G2S, which (especially 35GS) on the standard norms are ogranichenno welded. In particular, for a steel 35GS SNiP 2 arc welding vkrest...
    Metallicheskaya a grid
    Factory of metal grids: production a grid welded, a grid kladochnaya, a grid armaturnaya, a grid a road, building grid, armaturnyie skeletons. Any welded grid steel in availability. Capacities allow to produce 24 t/month of a metal grid, including under the drawing of the customer.Source: http://rus73.ru/...
    Profil faltsevoy roofs
    Faltsevaya the roof represents the special profile produced of zinced sheet or sheet with polymeric cover. The profile can be produced any length on the sizes of the customer and is completed by fixing elements (klyamerami).      The method of fastening of a roofing profile to obreshetke klyamerami, without a punched hole of fixing apertures in sheet, increases roof service life....
    Drovyanyie furnaces from a sheet steel
    Designs of metal furnaces-kamenok are very diverse and provide use of details of industrial production. In them the temperature that allows to start to bannyim to procedures in 30 minutes after the fire chamber beginning raises fast. Danger of a poisoning is excluded by carbonic oxide as furnaces are closed from different directions by metal, and stones heat up because...