Remont cracks on a ceiling and walls by means of materials CAPAROL Cap-Elast
| Shrinkable and technological cracks on facades of buildings, cracks on a ceiling and walls in interiors of apartments and offices, cracks on joints gipsokartonnyih plates, a crack …, cracks …, cracks … This problem takes away many forces, nerves and time from holders of premises, builders, house painters. Cracks spoil appearance and facades, and interiors. Especially dosadnyi cracks on joints gipsokartonnyih the plates, appeared on just repaired surface.
The reasons of occurrence of cracks are various. Cacks can be static (which size is not changed any more) and dynamic (which size is changed owing to the various reasons). Static cracks to eliminate easier. For repair of dynamic cracks application of special materials is required. In selection of materials for decorative furnish of surfaces with cracks the special approach also is required.
In program CAPAROL there is a complex of elastic materials of the maximum class Cap-Elast supplying the high-quality and durable decision on repair and finishing furnish of surfaces with cracks. Special elastic shpatlevka for filling of cracks Cap-Elast Ri? spachtel ("Ri?" - "crack" (nemetsk.)) will allow to close up a crack easily and reliably. Reinforcing priming paint Fibrosil, highly elastic paints PermaSilan, Cap-Elast Phase 1 and Phase 2 will allow to execute painting of a surface and will supply long-term reinforcing and overlapping treschinovatyih surfaces. The engineering specifications on system Cap-Elast contain the description of the technological schemes allowing effectively to repair practically any surface.
In the given article the most widespread problems with cracks and methods of their removal are described some.
1. Separate constructional cracks. For repair of these cracks arising in a bricklaying, concrete, gipsokartonnyih joints the following approach, etc. is recommended:
To embroider a crack for the width of 1 sm and depth of 1 sm in the form of letter U (fig. 1), thoroughly to clear from dust and progruntovat to saturation Dupa-grund or Caparol Tiefgrund TB (fig. 2), to fill in to level of a surface with material Cap-elast Ri? spachtel (fig. 3) and is good for drying. At gypsum cardboard repair it is recommended before drawing Cap-elast Ri? spachtel to ground a surface material Caparol-Putzgrund;
Finishing cover to execute elastic paint Cap-Elast Phase 2 or PermaSilan (for demonstration of high elastic properties of this material we put it on a cardboard and subjected to the various deformations, the painted surface thus remained whole), Muresko, AmphiSilan;
| |
|
|
Fig. 1. Preparation of a crack for repair |
Fig. 2. Priming |
Fig. 3. Crack filling
shpatlevkoy Cap-Elast |
2. At the small cracks close to a surface, and also the cracks arising at usadke and drying in plaster or concrete, it is recommended to execute surface priming by material Caparol Tiefgrund TB or Dupagrund and in two layers to put elastic paint Cap-Elast Phase 2 or PermaSilan. For reception of a surface with easy structure special reinforcing paint Fibrosil is used. This material contains the fibres reinforcing cracks, and allows to create a beautiful structural surface.
3. At cracks in seams, and also cracks in a concrete surface it is recommended to execute surface priming by material Dupagrund, as the first layer to put Fibrosil or Cap-Elast Phase 1 and as finishing - Cap-Elast Phase 2 or PermaSilan.
4. To avoid occurrence of cracks in joints gipsokartonnyih sheets it is recommended zashpatlevannyih to execute surface priming by a joint special material Caparol Tiefgrund TB. The given processing will reliably protect seams from water penetration, and as consequence will not give vozmodnosti occurrence and development to cracks. More difficult variants should be considered in details in each concrete case.
It is necessary to notice, that all transferred materials are one system, supply the long-term decision of a problem that guarantees a beautiful kind to a facade and an interior and have already deserved to itself high popularity.
Date of the publication 11.05.06
Treschinyi on a ceiling or on walls? CAPAROL solves a problem!Shrinkable and technological cracks on facades of buildings, cracks on a ceiling and walls in interiors of apartments and offices, cracks on joints gipsokartonnyih plates, a crack …, cracks …, cracks … This problem takes away many forces, nerves and time from holders of premises, builders, house painters. Cracks spoil appearance and facades, and interiors. Especially dosadnyi cracks on joints...
Treschinyi on a ceiling or on walls? CAPAROL solves a problem!Shrinkable and technological cracks on facades of buildings, cracks on a ceiling and walls in interiors of apartments and offices, cracks on joints gipsokartonnyih plates, a crack …, cracks …, cracks … This problem takes away many forces, nerves and time from holders of premises, builders, house painters. Cracks spoil appearance and facades, and interiors. Especially dosadnyi cracks on joints...
Pobeditel cracksHow to avoid occurrence and development of cracks on stone facades?The problem can be decided by means of elastic polymeric stenovyih covers (EPS). They are capable to tighten cracks in stone walls, protecting them from the further destruction.Whether operational qualities EPS depend on a thickness of a layer?Yes. Maintenance of proper operational qualities depends on a choice of a thickness...
How to whitewash a ceilingWhitewashing is a most simple and cheap method of repair of a ceiling.For colouring whitewashing which can to prepare from slaked be exhausted or a chalk more often is used. To begin colouring process it is necessary from the most important and labour-consuming stage - preparations of a painted surface. Here it is necessary: To wash off warm water (or...
the French ceiling.... Ceiling furnish very difficult employment. Long I search for something beautiful, reliable and to repair it was not necessary any more.... At the moment such material is - the French tension ceiling. It is possible even to tell, that this finished product because it produce to order strictly on a premise configuration. Unlike other materials it is established not...
Dekorativnyie materials for processing CAPAROLThe group of firms CAPAROL represents range of decorative materials for processing. Decorative materials for processing CAPAROL — azures, plasters and other decorative covers are ample opportunities and diverse ideas for refined design registration of interiors. Welcome in the individual and unique atmosphere created CAPAROL!If your standards — hospitality, a cosiness, comfort and the maximum functionality, and you wish to...
How to make a ceiling ideally equalProfessionals say, that quality of repair judge, first of all, on a ceiling. It should be without stains, cracks and irreproachably equal. At desire, ideally equal it is possible to make any ceiling. Now there are two methods of their alignment - "crude" and "dry" (using building terminology). The "crude" method consists in drawing of special mixes on previously prepared...
Podklyuchenie a chandelier and fixturesAs a rule in a distributive box there is a hook on which the chandelier or the fixture is hung up. The hook is twisted in box plastic. In due course plastic loses the durability and the chandelier can fall. Therefore before to hang up a chandelier is better prosverdlit a new aperture in a distributive box so that dyubel...
ZHeleznodorozhnaya a springForge productionOn by major repairs and insignificant modernisations, it is supposed to generate a line on production of face keys of the small sizes with the semi-conductor converter and re-equipment of auxiliary technologies on performance under standard DIN.Internal cracks deserve special attention as defect finds out, in most cases, only at operation at the moment of destruction of fixing details...
smesiStUc-O-FlEx - high technology of facing of wallsThe diverse range of the materials for processing presented today in the building market, includes highly elastic akrilovuyu plaster Stuc-O-Flex. Stuc-O-Flex combines teploizolyatsionnyie properties and attractive appearance of traditional plaster with exclusive field performances and wear resistance of cover.Stuc-O-Flex Represents a highly elastic polymeric material (acryle of 100 %), on appearance and to the touch similar to usual plaster cover....
Vse about shpatlevkeApplicationIt is applied to alignment of the plastered and concrete surfaces under painting, and also for repair of plaster, panels, zadelki cracks, filling of local apertures.The characteristicFront shpaklevka - tonkodispersnyiy tsementosoderzhaschiy a material with the chemical additives giving highly elastic properties and raising adhesion to the basis. Front shpaklevka "Anchor" - it is cold-resistant, it can be applied outside of...
SHpatlevka for seams SHpaklevka for seams gipsokartonnyih sheets on a plaster basis.It is intended for zadelki joints gipsokartonnyih sheets without use of a reinforcing grid, and also for alignment of walls and ceilings from concrete, plasters on a plaster and cement basis, gipsokartonnyih sheets in dry premises.Thickness of a layer of alignment from 1 to 5 mm. Colour - white. FEATURES:For zadelki seams...
Otvertka slesarno-assemblyAlong with application of high-strength hardware of the traditional form, introduction of new progressive designs by an actual problem there is a production of progressive fixture.The present requests presented to fixing items directly are defined by the increased requests to the modern engineering. Simultaneously with intensive operation of cars and mechanisms downward tendencies of weight of assembly elements, to assemblage...