protection against corrosion
It is protection of designs against destruction by wandering currents which arise owing to leak from electric chains of a part of a current in soil or water solutions. Therefrom they get on metal designs. In places where the current leaves again these designs in soil or water, there is an anode dissolution of metal or as it is accepted to speak usually, corrosion under the influence of wandering currents. Such zones of destruction of metals under the influence of wandering currents are especially often observed in areas of land electric transport. Wandering currents dissolve metal on anode plots according to law Faradeya. These currents can reach forces in some ampere that leads to the big corrosion destructions. For example, passage of an anode current within one year force in 1 And will cause iron dissolution — 9,1 kg, zinc — 10,7, lead — 33,4 kg.
Material have prepared L.RUDNITSKY, E. ABISHEV, A.ZHUKOV, And. SAHIBZADINOV
It is introduced: on March, 01st, 2007
How to protect from corrosion underground pipes?Except use of special covers, there is protection widely applied all over the world — cathodic polarisation. It represents the source of a direct current supplying polar potential min 0,85 In, max — 1,1 V.Stantsija consists only of the usual transformer of an alternating voltage and diodnogo the rectifier.How many there is a cathodic...
whether ¬ЅSyiј«EЎ« to restore the old zinced surface?
All history of technical progress of mankind can be considered as history of struggle of mankind with corrosion.The rust inevitably attacks cars, mechanisms, bridges, berthes and other metal designs, destroying all with such work the created.Among many methods of struggle against corrosion by one of the most effective drawing on a surface of metal of a layer of zinc is....
Kak to struggle with metal corrosion?
How to struggle with metal corrosion? How to be protected from its destructive effect? Constantly it is necessary to face this problem on production and in a life. This problem - sharp and in building. It is enough to tell, that annually in the world as a result of corrosion leaves from standing to 10 % of melted ferrous metals.That...
Antikorroziynaya and decorative colouring of building designs from the zinced steel and nonferrous metals
In building the set metallokonstruktsiy which should be protected from effect of environment and, first of all, from corrosion is applied.Corrosion or raz'edanie is physical and chemical reaction of a material with environment, under vliyaniemkotoroy properties of metal are changed, that conducts to damage of metal, environment or technical system. The rust, in turn, is a consequence of the...
the vodostoktsink-titan
Zinc-titan also as copper and aluminium is an excellent roofing material. Zinc-titan apply both to the system of new roofs, and for restoration of the old. Zinc-titan represents an alloy of "D-zinc" or "deforming zinc". "D-zinc" produce in the industrial method by entering into rather free zinc from impurity (which degree makes 99,995 %) alloying additives in the form of...
Obespechenie an electrosecurity
Question: What represents the system of protective switching-off (UZO)?The answer: Functionally UZO it is possible to define as the high-speed protective switch reacting to a difference of currents (a differential current) in the conductors making the electric power to protected electroinstallation. The principle of action UZO of differential type is based on application of the electromagnetic vector adder of currents...
the vodostoktsink-titan: an eternal roof
In the Western Europe zinc is used in building since XVIII century. Only in a historical part of Paris on roofs 200 thousand t this material lays. In Russia usually as an example mention a building of the State historical museum in Moscow. Elegant «teremnyie» roofs of this structure have cover from zinc sheet and 1910-1911 during reconstruction of a...
How to choose the zinced building profile?
Today only the lazy businessman has not opened the production of a building profile. As a rule, manufactured such "firmochkami" production not only is not certificated, but also mismatches the elementary quality standards and safety requirements. Often for the sake of reduction of expenses these companies use elektroliticheski the zinced steel intended only for the further painting, instead of goryacheotsinkovannoy....
Induktsionnyie coppers - an alternative method of electroheating
Despite progress in perfection TENovyih of coppers, they still have essential defect - final significance of their reliability which completely to overcome is practically impossible. Especially it concerns coppers and boiler-houses of the big capacity where TAN'S quantity is great also probability of failure above. Modern engineering decisions base on failure of TANS and transition to other methods of electric...
Kryishi. Roofs metal. Precepts of the future beauty
QUESTION: From what to proceed at a choice of roofing cover?The answer: the Roofing material choose at the stage of house or cottage designing. The kind of roofing cover is defined by a design of a roof and depends from: structure type; design feature of a roof; local climatic conditions; from zaproektirovannogo design of a structure. The great value has...
Dekorativnyie and protective. Domestic experts develop a complex of new paint and varnish materials for cover of metals and nonmetals
Now the market offers the most various protective and decorative paint and varnish materials import or domestic manufactures. One — supply beautiful decorative properties of cover, but are insufficiently durable. Others at all dignities form insufficiently strong protective film, under the third — fast arises and corrosion develops so-called podplenochnaya...But how correctly to choose the optimal variant of cover for...
Tehnicheskie characteristics asbestotsementnyih pipes.
Our industry manufactures three types asbestotsementnyih pipes: water, pipeline and sewer (beznapornyie).In comparison with metal asbestotsementnyie pipes have a number of advantages. They it is easier on weight, in 2 - 4 times are cheaper, are not exposed to destruction by wandering currents which often put out of action metal pipes; more a rack against action mineralizovannyih waters; the water...
Lakokrasochnyie materials against corrosion
Question: How protect metals from corrosion paint and varnish materials (LKM)?The answer: Depending on structure of pigments and a film-forming basis paint and varnish covers can execute functions of a barrier, a passivator or a protector.Barrier protection is a mechanical isolation of a surface. Infringement of integrity of cover even at level of occurrence of microcracks predetermines excited environment penetration...