Bani, saunas, pools. Protective actions

Question: How to protect designs of a bath from rotting?
The answer: If the bath is constructed with observance of all requests and correctly maintained, this structure does not require special protection of a tree against rotting. The heat, a smoke and soot will be the best safety lock.
Constructive protection consists in creation of the conditions interfering occurrence and development of fungi. Will not be kondensatsionnogo humidifying if the heat-insulation layer close adjoins an outside (cold) surface, and proizoliruyuschiy — to internal (warm).
For protection from rotting of boards of a floor underground aeration, application of dry materials of the basis or the system continuous paroizoliruyuschego a layer is necessary.
In board overlappings it is necessary to arrange prospirits, and the ends of the beams inserted into nests, to cover or wrap up waterproofing materials and to stack with a backlash not less than 3 sm between a wall of a nest and a beam end face.
For protection from rotting an outside wall cover with drying oil and paint. An internal covering of a bath do not paint and do not varnish to avoid allocation of harmful substances at heating. Besides, the paint does not pass pairs.

Question: How to struggle with a mould in a bath, not applying not chemical means?
The answer: the Bath is subject to deterioration much more strongly, than any other premise. In a sweating room hot, high humidity. The main reason of ageing of baths also consists in it: at constantly varying significances of temperatures and humidity materials of internal furnish test «serious loads».
Therefore wooden surfaces of a sweating room and a washing room should be whenever possible dry. Hence, to heat a bath it is necessary so that heat stock in kamenke sufficed for complete drying of wooden surfaces. Do not save fire wood. And if owing to any reasons your bath nevertheless has cooled down, be not too lazy to heat the furnace once again not to keep a premise the crude. Very important such condition for the baths equipped with wood furnaces of periodic action, and baths which burn "in a black way".
To thicket air a bath, support cleanliness of wooden surfaces.

Question: How to save wooden details of a bath from fungi?
The answer: Wooden structures protect both from external effects, and from the internal. For this purpose there are various means and methods. For example, open surfaces can be processed hot drying oil or regularly to paint. But here is how to struggle with such misfortunes, how insects-wreckers, a mould, seaweed, bacteria, fungi and antimitsetyi (symbiosis of a fungus and seaweed)? The decision of this problem anxious scientists and builders all over the world.
Every possible antiseptics is offered. Professionals subdivide decay on colours (red, white, grey, yellow, green and brown). Red decay amazes coniferous breeds of a tree, white and yellow — an oak and a birch, green — oak flanks, and also wooden beams and overlappings of cellars.
The ineradicable devourer of wooden structures is white house the mushroom, or «a wood cancer». During former times the log hut amazed with a cep burnt, as plague, — rescued the next structures. So radical actions are connected by that speed of destruction of wood a white house mushroom is that that for 1 month he completely "eats" a 4-centimetric oak floor. Now, to get rid of a white house mushroom, assort and burn the amazed plot, and other part impregnate 5 with %-s’ hrompikom (5 %-s’ solution of bichromate kaliya in 5 %-s’ sulfuric acid), thus is recommended to process and the earth on 0,5 m in depth.
In the course of preparation of a solution and its drawing on a tree it is necessary to use rubber gloves and to watch, that the solution did not get on a skin as bichromate is a strong oxidizer. After drawing and solution drying this substance becomes absolutely safe. The tree after such processing will acquire greenish colour (result of chemical reaction of bichromate kaliya with wood). Formed okis chrome reliably protects not only from rotting, but also from defeat of a tree by larvae of insects.

Question: whether It is possible to apply deodorants in a bath?
The answer: to Water with aromatic oils the heated stones it is impossible. The smell will be more thin and it is more pleasant, if in a safe corner of a sweating room far away from the furnace to deliver a vessel with boiled water in which such oils are added. Their aromas will be absorbed in wooden surfaces and to be accumulated in air.
It is possible to apply compulsory dezodorirovanie by means of ozone and ultra-violet beams. Having dried a premise after bannyih procedures, establish in it for 30-40 minutes a household ultra-violet radiator. It will help to improve air and all surfaces of a bath by means of ozone and the Uf-beams destroying bacteria.
Material have prepared L.RUDNITSKIY, E.ABISHEV, A.ZHUKOV Source: the Newspaper "Building" #13 (2005) heading «Stroyinform»

It is introduced: on September, 28th, 2007

Derevoobrabotka: imitating possibilities
Question: What methods of decorative furnish of wood?The answer: In modern significance as wood furnish understand creation on its surface decoratively-sheetings by means of paint and varnish, film and sheet materials. Depending on used materials, requests to appearance and to protective properties paint and varnish covers can be transparent or opaque and consist of one or several layers of various...
Zaschita a tree from fire, or Self-attenuation is guaranteed
Question: How to define fire resistance of the impregnated wood?The answer: the Basic indicator of firmness of the impregnated wood is its group of combustibility defined in the course of certified tests. If the wooden design is impregnated qualitatively at contact to a burning match or an ignition paper will not occur. At long contact to fire it can start...
Kak to remove an old paint?
1. If you have an old wooden furniture it can give a new life, having painted it under your new style and colour of a room. As it is possible to paint window frames and doors. But that the paint has well laid down, the surface should be prepared correctly. Especially it concerns window frames, after all if not to...
20 simple methods qualitatively to put a water varnish
1. Progruntuyte a wooden surface. Priming needs to be carried out a special water first coat or tonirovannoy impregnation. It will reduce the cost of a varnish and will allow to receive more equal top layer.2. For reception of "mirror" cover before priming use a method of wet grinding. Otshlifovuyte the wood previously well moistened with water, also allow to...
the lesomaterialytermo-processed wood
The thermoprocessed woodMunich there has passed international building exhibition BAU 2001 on which new working out Finnish derevoobrabatyivayuschey has been presented the industry – the thermoprocessed wood.The Moscow company of Joint-Stock Company "Kestroy" has already started to deliver this new product on the building market.In Finland in 1920th years have started to study the processes proceeding in a tree under...
Okraska walls
Question: How to prepare the plastered surface of a wall for painting?The answer: splashes, solution drops At first leave. The painted surface should be strong, dry and pure. The paint will not be kept on a damp and dirty surface and after a while inevitably will start to exfoliate. Also it is impossible to paint the fragile, poorly connected surfaces...
LKM for anticorrosive protection of metals
Question: What covers on metal are the most widespread among domestic LKM?The answer: Enamels alkidnyie PF-115 and PF-115 "House-keeper" widely apply "Standard" to outside and internal works on metal surfaces. Enamels form the cover proof to effects of water, washing-up liquids, the industrial oils, stable against changes of temperature from-50 to +60°S. Solvents — solvent, uajt-spirit. The cost accordingly 100...
LKM for anticorrosive protection of metals
Question: What covers on metal are the most widespread among domestic LKM?The answer: Enamels alkidnyie PF-115 and PF-115 "House-keeper" widely apply "Standard" to outside and internal works on metal surfaces. Enamels form the cover proof to effects of water, washing-up liquids, the industrial oils, stable against changes of temperature from-50 to +60°S. Solvents — solvent, uajt-spirit. The cost accordingly 100...
Termoobrabotannaya wood
From 16.01.2001 till in Munich there has passed international building exhibition BAU 2001 on which new working out Finnish derevoobrabatyivayuschey has been presented the industry – the thermoprocessed wood. The Moscow company of Joint-Stock Company "Kestroy" has already started to deliver this new product on the building market.In Finland in 1920th years have started to study the processes proceeding in...
Laki
Varnishes name the big group of the materials representing solutions of film-forming substances (pitches or polymers) in organic solvents or water. After drying they form firm transparent (colourless or colour) a film. Varnishes use for reception of transparent covers when it is necessary to protect and simultaneously to save or especially to underline structure of the painted surface, mainly valuable...
Gruntovki, shpatlevki, podmazki
First coats name the paint and varnish materials put on the levelled surface by the first layer, supplying coupling of the basic paint and varnish cover (film) with a painted surface both giving the chance to receive pure and equal colouring. They differ from painting structures the smaller contents of pigments. Colour of first coats should not coincide with colour...
Gruntovki, shpatlevki, podmazki
First coats name the paint and varnish materials put on the levelled surface by the first layer, supplying coupling of the basic paint and varnish cover (film) with a painted surface both giving the chance to receive pure and equal colouring. They differ from painting structures the smaller contents of pigments. Colour of first coats should not coincide with colour...
Derevyannyie windows and doors: furnish and durability
Windows and doors should supply isolation of premises from harmful effects of an environment: coolings, an overheat, penetration of a moisture, a dust, a wind, smells, sounds and so forth Thus windows and doors should be reliable, have necessary durability as have the mobile elements perceiving power loads.Traditional material for manufacturing of windows and doors long since is the tree....