Antikorroziynaya protection

Each who had to prosecute a subjects of protection of metal from corrosion, faced a number of problems. The range of anticorrosive paint and varnish covers is huge, however on closer examination practically all materials have restrictions on application or operation. Furthermore, cost of high-quality paints and first coats considerable, and with allowance for that on a spadework leaves to 70-80 % of a total cost of colouring it is necessary to choose, paint "forever" or to "freshen" each season. However metallokonstrutsii – not shtaketnik on a garden plot which is easy for tinting. Before each new cover it is necessary to clear a surface, sometimes and to polish, then to degrease, dry, ground and, at last, to put a new paint. Process labour-consuming and long. Furthermore building can proceed practically all year long, and here to paint it is necessary only during a warm season and it is desirable in dry weather.
Seller’s price of works, necessity of observance of temperature and technological modes – only small part of a problem. The corrosion-resistant coating should have high protective properties among which the major are himstoykost, stability to effect of the atmospheric environment, thermal stability, high adhesion, ability to resist to mechanical damages (istiraniyu, to blows, etc.).
And, at last, there is a number of such characteristics as, for example, drying time, the material cost, appearance of an item. At first sight, these qualities have no basic significance, but for the consumer they are on the first place.
Undoubtedly, that the material, capable to combine in itself, for example, system from obezzhirivatelya, a first coat and a finishing layer, could facilitate considerably colouring process metallokonstruktsiy.
Such paint exists and already is in great demand in the market. It is a series of grounds-enamels SBE-111 "Unifloor" on kauchukosmolyanoy to the modified basis. A series consists of five updatings of grounds-enamels:
Mark "And" is intended for protection against corrosion metallokonstruktsiy and the equipment, working in atmosphere of the industrial environment, at temperature not above 100 °S.
Enamel can be used for anticorrosive protection of carbonaceous steels (without the processing, zinced, fosfatirovannyih); designs from stainless steel (without processing and passivirovannoy), aluminium and its alloys.
Mark is intended for protection against corrosion metallokonstruktsiy and the equipment, working at temperature not above 100°S: in the conditions of industrial atmosphere of a temperate climate; in atmosphere of a tropical marine climate; in contact with marine and fresh water; in excited environments, in particular, in storage rooms and transport for carriage mineral fertilizers, pipelines, metal containers, gutters, metal tanks, etc.
Mark "In" is intended for protection against corrosion metallokonstruktsiy and the equipment, working at temperature not above 100 °S in strong excited environments: 30 % HCl; 60 % H2SO4, 40 % NaOH, and also anticorrosive covers of internal surfaces of the equipment, pipelines and building designs of thermal power stations. Cover maintains effect: 10 %-s’ water solutions NaCl, 6 %-s’ water solutions NaOH, 5 %-s’ water solutions H2SO4, nagretyih to 70 °S. Abrasive resistant (3,3 kg/microns.).
Mark «G» is intended for protection against corrosion of tanks, metallokonstruktsiy and the equipment, working in contact to petroleum, at temperature not above 120 °S and at periodic effect dry peregretogo high pressure pair.
Grounds-enamels are used for anticorrosive protection of carbonaceous steels (without the processing, zinced, fosfatirovannyih), designs from stainless steel (without processing and passivirovannoy), aluminium and its alloys. All enamels unicomponent, ready to application. The surface does not require deep zachistki and special degreasing, adhesion in 1 point is reached after removal from a surface of metal of a friable rust by a metal brush, peskostruynoy or drobestruynoy processings. Time of drying to degree «3» – no more than 1 hour. Grounds-enamels SBE-11 "Unifloor" can be used as an interoperational first coat, are easily blocked by other dyes on any bases.The material is granted
Company "»U«hјbFSUїbЅSCH" Source: the Newspaper "Building" #12 (2004) heading “Stroyinform”

It is introduced: on February, 24th, 2004

of "Battery" should shine!
All enamels and paints for radiators have general requests: they should protect metal surfaces from corrosion, not turn yellow and not exfoliate under the influence of a heat.European «the thermal standard» radiatornyih paints — to 140-180 degrees. But also it not the limit — is also such which maintain to 600. For our central systems otopleniyatem paint and varnish materials...
Kak to struggle with metal corrosion?
How to struggle with metal corrosion? How to be protected from its destructive effect? Constantly it is necessary to face this problem on production and in a life. This problem - sharp and in building. It is enough to tell, that annually in the world as a result of corrosion leaves from standing to 10 % of melted ferrous metals.That...
LKM for anticorrosive protection of metals
Question: What covers on metal are the most widespread among domestic LKM?The answer: Enamels alkidnyie PF-115 and PF-115 "House-keeper" widely apply "Standard" to outside and internal works on metal surfaces. Enamels form the cover proof to effects of water, washing-up liquids, the industrial oils, stable against changes of temperature from-50 to +60°S. Solvents — solvent, uajt-spirit. The cost accordingly 100...
LKM for anticorrosive protection of metals
Question: What covers on metal are the most widespread among domestic LKM?The answer: Enamels alkidnyie PF-115 and PF-115 "House-keeper" widely apply "Standard" to outside and internal works on metal surfaces. Enamels form the cover proof to effects of water, washing-up liquids, the industrial oils, stable against changes of temperature from-50 to +60°S. Solvents — solvent, uajt-spirit. The cost accordingly 100...
Organosilikatnyie materials
Organosilikatnyie materials - group of the synthetic materials intended for creation of heat-resistant protective and decorative covers (paints). Organosilikatnyie materials represent suspensions of the crushed silicates and oksidov metals in the solutions containing organic and elementoorganicheskie polymers. Properties organosilikatnyih materials are caused by their molecular structure. At polymerisation the matrix with inorganic napolnitelyami is formed poliorganosiloksanovaya.The whole complex of protective...
Antikorroziynaya and decorative colouring of building designs from the zinced steel and nonferrous metals
In building the set metallokonstruktsiy which should be protected from effect of environment and, first of all, from corrosion is applied.Corrosion or raz'edanie is physical and chemical reaction of a material with environment, under vliyaniemkotoroy properties of metal are changed, that conducts to damage of metal, environment or technical system. The rust, in turn, is a consequence of the...
"Vector" against corrosion
Domestic experts develop a spectrum of new highly effective covers "Vector" for anticorrosive processing of pipes of a heat supply, and also others metallokonstruktsiy. There is no necessity to speak as it is important, as an acute problem of anticorrosive protection in building and, first of all, in heat supply systems. Laid beskanalno or in a collector under the earth...
Lakokrasochnyie materials against corrosion
Question: How protect metals from corrosion paint and varnish materials (LKM)?The answer: Depending on structure of pigments and a film-forming basis paint and varnish covers can execute functions of a barrier, a passivator or a protector.Barrier protection is a mechanical isolation of a surface. Infringement of integrity of cover even at level of occurrence of microcracks predetermines excited environment penetration...
Lakokrasochnyie materials against corrosion
Question: How protect metals from corrosion paint and varnish materials (LKM)?The answer: Depending on structure of pigments and a film-forming basis paint and varnish covers can execute functions of a barrier, a passivator or a protector.Barrier protection is a mechanical isolation of a surface. Infringement of integrity of cover even at level of occurrence of microcracks predetermines excited environment penetration...
Dolgovechnaya metal protection
For qualitative protection of metal against corrosion it is necessary to execute the following number of works:1. Surface preparation.The surface should be completely cleared for achievement of good coupling of a ground and enamel with metal (i.e. Adhesions). Especially it is important at repair of old covers if clearing is conducted poor the new paint coat will be short-lived. At...
Dolgovechnaya metal protection
For qualitative protection of metal against corrosion it is necessary to execute the following number of works:1. Surface preparation.The surface should be completely cleared for achievement of good coupling of a ground and enamel with metal (i.e. Adhesions). Especially it is important at repair of old covers if clearing is conducted poor the new paint coat will be short-lived. At...
Vse about paint and varnish materials
For what paint and varnish materials are necessaryThe paint and varnish material is a composition which at drawing on a surface of a painted item is formed in continuous polymeric cover with certain properties. Such materials isolate surfaces from external effects and give them certain colour, a kind, the invoice. Paint and varnish materials are necessary for protection of items...
Vse about paint and varnish materials
For what paint and varnish materials are necessary The paint and varnish material is a composition which at drawing on a surface of a painted item is formed in continuous polymeric cover with certain properties. Such materials isolate surfaces from external effects and give them certain colour, a kind, the invoice. Paint and varnish materials are necessary for protection...