Akkumulyatornyiy the tool

To good, the person gets used very fast - to take here, for example, electrotools - agree what to work as them very conveniently, and sometimes easier not to manage. However, this "convenience" well works until in your socket there is an electricity - this problem is well familiar to holders of garden plots - to remain without "light" it is possible during the most improper moment.

However, if you near at hand have an electrotool which can work both from an alternating current network, and from the strage battery - the question is decided very simply. Tools of such type it is manufactured much - drills and shurupovyortyi, grinding machines, fret saws, power saws and staplers …

Storage tools are rather practical - at work with them you do not depend on the socket as "are not adhered" to it by wires. Certainly, absolutely without a current source not to manage - accumulators are necessary for recharging periodically. For this purpose it is required to you zaryadnoe the system. In addition to already available accumulator it makes sense to acquire one more - on change, thanks to it you can execute great volume of works without interruption on gymnastics. In zaryadnom the system the storage battery is charged to complete capacity in some hours. "Training" is required to the new battery - it should be charged, and then is discharged five-seven times - thanks to it at each following gymnastics the accumulator will be charged completely.

In electrotools use nickel-kadmievye accumulators which are fast spent and constantly require additional gymnastics, especially after a long break in work. However in due course accumulators produce the resource completely - after thousand zaryadok they become disabled. To throw out or burn them it is not recommended, as these can harm to environment - it is possible to hand over the fulfilled accumulators in item of reception of nonferrous metals.

The large part of all storage tools is made by drills and shurupovyortyi (vintovyortyi). Vintovertyi - the most simple, from two and a half volt accumulators - they twist only screws and screws. With one accumulator it is possible to twist or unscrew from a tree about one hundred screws with a diameter three and length thirty millimetres.

Two-high-speed electrodrills of shock action are more powerful - they are equipped with accumulators with pressure from seven to eighteen volt. And it is enough effort created by them for drilling of apertures in a stone, a tree and metal in diameter to ten millimetres.

As a rule, at complete gymnastics of the accumulator it is possible to drill about three tens apertures in diameter of six millimetres in a stone or three hundreds apertures of the same diameter in a tree.

One more quite good tool - storage gaykovert with replaceable heads which is simply irreplaceable at unscrewing and screwing up of nuts - by the way, in the absence of the accumulator it can be used and as a usual wrench.

Good advice:

Never load the tool so that load forced the engine to stay.
Store it in a dry and warm place. The ambient temperature should not exceed fifty degrees of Celsius, differently it is possible to damage the accumulator.
Do not keep the tool under direct solar beams or a rain.
The maximum service life accumulator nickel-kadmievogo raises at operation in the temperature range making from ten to forty degrees of Celsius.
For achievement of complete gymnastics of its accumulator it is necessary to discharge completely, and then to charge again.
For accumulator gymnastics use only regular zaryadnoe the system.

Construction & Building

Akkumulyatornyiy the tool

Akkumulyatornyiy the tool